Is it Smart Policy to Kill One Fish to Save Another?

By Kirk Deeter

In many parts of the country, anglers and wildlife management agencies are wrestling with the issue of saving native fish, or wild fish, or certain sportfish species. And in some of those situations, the threat to the "desired" species is often another species. And the answer, in many cases, is to kill off one type of fish to protect the other.
It's a tricky situation, because in most of those situations, human manipulation of the ecosystem — often with good original intent — is the reason the problem exists in the first place. In Colorado, for example, we have some of the best pike fishing in North America. Problem (for some) is that those pike just love to eat trout. So in some places, there are mandatory kill regulations — catch a pike and you are duty-bound to kill it. For certain invasive species, like snakeheads or Asian carp, that's not so much of a dilemma. Asian carp in the Great Lakes is a nightmare scenario that could devastate that fishery. Of course, that fishery depends on Pacific salmon and steelhead, which weren't in the Great Lakes at all until people put them there over 40 years ago.
The native trout in the Great Lakes is the Mackinaw, or lake trout. But years ago, when the lakes were severely impacted by industrial pollution and other factors, a number of lakers were transported and planted into deep, clean lakes out West. Now that's a problem in Yellowstone Lake, for example, where scientists believe the lake trout have decimated the native Yellowstone cutthroat trout population, and still threaten that species' very survival. Some would argue that the lakers are only one culprit among many, including whirling disease, predatory birds, and so forth. But now there's a massive undertaking to net and kill lake trout in order to protect the cutts.
People once thought it was a good idea to put brook trout in mountain lakes and streams out West. And in terms of creating an abundant, sustainable food source, it was. The brookies thrived, but at the expense of native cutthroats. Brown trout aren't native to anywhere in America, but we sure love them. And rainbows wouldn't live in places like Pennsylvania, New York, Texas and Hawaii if we didn't put them there. Many anglers are darn glad that we did.
So the question becomes, at what point do we accept "what is" now, and how hard should we try to make some order out of the genetic "pick-up sticks" that have been scattered all over the country's lakes and rivers over the past century and a half? Can we even untangle the situation at all, or is that just folly? We made our beds, so to speak, so now we have to lie in them... or do we?
I'm a romantic when it comes to fishing. And there is nothing more special to me than catching native fish in their native water. That trumps size. That trumps quantity. One native in a native place makes for the best fishing day I can imagine.
I'd gladly trade all the little brook trout in the stream by my house for a handful of greenback cutthroats. If that means poisoning the water and killing all the brookies to establish a new base in which to reintroduce natives, so be it. (You can't mess around if you're going to make real change; the invaders or introduced fish must be eliminated.) In the case of the lake trout, I sure wish there were more in the Great Lakes. And I know they're fun to catch. But I support efforts to get them out of places where scientists tell me (and I believe the scientists) where they threaten the native cutthroats. So kill 'em. Kill em 'all.
I wouldn't go so far as to suggest taking all non-native trout out of non-native waters. Does that make me a hypocrite? Maybe. I can live with that. But I do think we need to do our very best to leave native fish in native waters for future generations. And sometimes drastic steps call for drastic measures.
But that's just my two cents? What do you say?


read more →

How To Choose The Right Spey/Switch Fly Line

By Kirk Deeter
Let's face it, spey and switch fly lines are not the easiest things in the world to figure out. Almost everyone I know has questions, myself included. There are tons of different styles, weights, lengths, etc. and matching them to a specific rod can be challenging at best.

The movie here, while obviously produced by RIO does an excellent job of demystifying spey and switch lines for people who have questions about them. It's actually the best one I've ever seen.  Simon Gawesworth is probably one of if not the most qualified in the world to answer these questions and explain the differences in these types of lines.
Enjoy the movie and hopefully it helps you out if you have questions about spey and switch rods.

read more →

U.S. Fish and Wildlife Service Suspends Operations During Federal Shutdown

By Ben Romans
A press release from the U.S. Fish & Wildlife service said that because of the shutdown of the federal government caused by the lapse in appropriations, the agency will suspend most programs and operations, including public access to all National Wildlife Refuges and all activities on refuge lands including hunting and fishing.
"Closing off public access to our national wildlife refuges and public lands is the last thing we want to do, but is consistent with operations called for during a government shutdown" said Director of the U.S. Fish and Wildlife Service Dan Ashe. "This is difficult news for the families, birdwatchers, hunters and anglers, and recreationists who enjoy the great outdoors on the refuges – as well as for the many local businesses who depend on the tourism and outdoor recreation economy they generate. I think it's most difficult for the thousands of furloughed Service employees who are impacted in carrying out their mission to protect our nation's resources and providing for their families."
Main impacts include:
  • All 561 National wildlife refuges are closed to public access. Visitor centers and other buildings are closed.
  • The National Wildlife Refuge System hosts more than 46.5 million people per year, and generates more than $342 million in local, county, state and federal tax income. Refuges also support more than 35,000 private-sector jobs.
  • All activities on federal lands and in public buildings are canceled. This includes hunting and fishing activities on refuge lands.
  • No permitting work or consultations will occur with respect to the Endangered Species Act, Bald and Golden Eagle Protection Act, the Convention on Trade in Endangered Species, the Lacey Act or the National Environmental Policy Act.
  • The shutdown will affect more than 7,000 Service employees, who are furloughed until an appropriation is passed.
  • Employees and others may not volunteer their services on behalf of Service functions or on federal lands.
Services and programs that will remain operational fall into the following exempted categories:
  • Programs financed by sources other than annual appropriations.
  • Activities expressly authorized by law.
  • Activities necessary to protect life and property.
  • Federal Aid in Wildlife Restoration and Sport Fish Restoration.
  • Natural Resource Damage Assessment Fund activities
  • Refuge Law Enforcement emergency operations
  • Firefighting emergency operations
  • Care and feeding activities at hatcheries and captive breeding facilities.
Because the website will not be maintained, the U.S. Fish and Wildlife Service website will be down for the duration of the shutdown. Additional information will be available at www.DOI.gov/shutdown as well as OPM.gov, which will contain information about the government's operating status on Tuesday, Oct. 1, 2013, and the days following.
The agency also suspended activity on its Twitter feed, the last post on October 1 reading "Due to a lapse of government funding, this account will not be active until further notice."



read more →

Angler Snatches His Catch Back From A Pelican's Throat

By Joe Cermele
There's probably something illegal about harassing a pelican, but I guess when a man is bent on catch and release, a man is bent on catch and release. Something like this ranks high on my "do not attempt" list.


read more →

Kayaking Anglers to Rendezvous in Australia for World Fishing Championship

By Ben Romans

On October 30, 2013, 41 kayaking anglers from 16 different countries will converge on the Bemm and Snowy Rivers in Victoria, Australia to compete in the 3rd annual Hobie Fishing World Championship.

A press release from Hobie says the competition includes anglers that competed in qualifying events throughout the spring and summer including the IFA Championships, Kayak Wars, Jamaica Bay Classic and Paddle Palooza.

All anglers will fish for Australia's black bream from identical Hobie Mirage Pro Angler 14 kayaks, provided and outfitted by the manufacturer, replete with think like an anchor, rod holders and Lowrance electronics. Live weigh-ins will take place on each of the three days of competition with anglers weighing three fish per day.  Find out more here: hobiefishingworlds.com 


Source : fieldandstream[dot]com
read more →

Shutdown Means Sportsmen Are Shut Out of Hunting and Fishing

By Bob Marshall
With fall in the air and hunting seasons about the open across the nation, many sportsmen had an urgent question today: Will the shutdown of the federal government impact our plans?
So your intrepid blogger got right to work on the issue. And, using his decades of experience as a crack journalist, he called the federal government agencies to find out what was closed.
First call: Department of the Interior. The recorded answer at the press enquiries desk: We're closed due to the shutdown.
Your investigator soon discovered the same situation at all the agencies: They were closed during the closure!
Fortunately (or, unfortunately), the folks in charge of our national lands - and hunting and fishing opportunities on those properties – are not strangers to these political windstorms, and prepared web sites explaining what would happen (close) during the shutdown. There was even an email contact of the lone employee covering press inquiries during the shutdown.
So, after an intense, deep, 15-minute investigation, I can answer the question "What federal lands are closed to outdoor recreation during the shutdown?"
The answer: Everything. All federally owned property is closed to all recreational use during the shutdown.
That information was confirmed by the U.S Department of Interior and the U.S. Department of Agriculture which manages, among other venues, all National Forests, National Wildlife Refuges, National Parks, Bureau of Land Management lands and National Recreation Areas.
So if you were planning to hunting, fishing, boating, camping or otherwise setting foot on federal properties – make other plans.
For more detailed information on the closure plans for the Department of Interior, go to http://www.doi.gov/shutdown.


read more →

Reader Photo of the Day: "5-Year-Old Lands Huge Bass"

Submitted by atdogbeach. 5-year-old Ethan Stoner caught this huge bass out of Vail Lake in California. As Ethan's dad tells it, "I was 100 yards down shore when I heard a commotion - next thing I know, Ethan has caught and landed this giant bass all by himself!" Brad had rigged Ethan up with a plastic worm rigged Texas style.

Got a great hunting or fishing photo? Send it to us here! We'll feature our favorites on our web site and Facebook page.


Source : fieldandstream[dot]com
read more →

Gear Review: Cabela's New American-Made Fly Rods And Reels

By Joe Cermele

In case you haven't noticed, there is a big push in certain industries—the outdoor industry in particular—to get back to producing wares in the good 'ol U.S. of A. Not long ago I found out that Cabela's was signing on for the movement with plans to introduce an American-made fly rod and reel series. Ray Zink, Cabela's Flyfishing Manager, told me the time seemed right, so the brand partnered with a small rod manufacturer based in the Pacific Northwest. The result is the American Dream rod series, and the WLz reel series, which is also produced state-side and designed by Waterworks-Lamson. I got my hands on a test combo so I could "live the dream," if you will.

Instead of going the trout route for this field test, I opted for carp. Tell you the truth, I've decided that carp are the perfect species for shaking down fly gear. They require long, accurate casts, eat dries and streamers, pull against the drag, and bend a rod to the max. I was fishing a 9-foot 5-weight, and even though some of the "golden bonefish" I hooked would have been better suited to a 7-weight, this rod did a fine job of slowing the fish's momentum during the initial run, and countering the short, pulsing bursts carp are known for during the tussle. This rod is probably a bit slower than you're used to, but in this case that softer action let me put more pressure on these broom-tail doggers than I would have with a faster rod.

To be honest, the first time I used the American Dream, I thought it was a little too slow for my taste. The more I cast it, however, the more I liked it. Even though I know accuracy is a product of good casting form, this rod seemed to naturally add to my accuracy. It is without question a rod made for the serious dry fly angler, mixing the smoothness of a glass stick with the backbone and sensitivity of a graphite rod. According Zink, my gradual appreciation of the American Dream was natural for a guy that has gotten so used to today's fast fly rods.

"I have always maintained that the perfect fly rod is the one that allows you to put a fly exactly where you need it without too much thought. A rod like that has to talk to you, allowing you to acquire the muscle memory of a proper cast," Zink explained. "It seems that over the last few years, rods have become progressively faster, and I think that we may have lost sight of that relationship between the rod and the angler."

While I can't speak for its performance over the course of multiple seasons, I can say that the reel feels well built. The tolerances were tight, and the drag was exceptionally smooth during some hard carp runs. According to the company, the "polymer-alloy and teflon-metal drag cones don't require lubrication and never wear." That's a tall order, but Waterworks-Lamson has a pretty solid reputation for making reels that can take beating. The WLz reels are fully machined anodized aluminum, and the drags are completely sealed.

So what does it cost to buy into the American Dream? The rods are available in weights 3 through 8, and will set you back $300. In my opinion, that's middle of the road these days for a quality rod, and these rods could actually command a higher price tag. The WLz reels run from 4- to 8-weight, and sell for $270. Once again, not a terrible price if you're in the market for a reel that's many notches above the beginner's model, but not the titanium plated, carbon-drag NASA job.


Source : fieldandstream[dot]com
read more →

Why The Right Shoes Are As Important As The Right Lure In Bass Fishing

By Dave Wolak

Here’s a little experiment to try next time you know you’re going to spend a long day bass fishing. Wear whatever pair of shoes you ‘d normally wear on the water, and note how you feel at the end of the day. Are your legs tired? Do your feet hurt? Is your back aching? It may seem like a really trivial piece of the overall bass fishing game, but I’d argue that the right footwear is just as important as a well-tuned reel and the right lures. This is especially true during those long, drawn-out days when the bite isn’t on fire and every cast and retrieve requires 100% focus.

Bass fishing keeps you on your feet, staring down at the water, for long periods of time. Fish a bunch of 10 to 12-hour days over the course of a month or so, and you might start noticing little aches and pains you never noticed before. Most of those little sore spots are a product of bad posture on the water. Now, without going into an excessive anatomy lesson, all you need to know is that your feet are the beginning of a chain that goes upward all the way to your head. So, if your feet aren’t properly supported, the next set of muscles in the chain step in. When they get tired, the next set steps in and so on and so forth. Add in an unstable, rocking boat on a choppy lake, and you’ll tire out fast if your feet aren’t properly supported.

I often see guys jumping onto bass boats wearing pancake-flat. Sandals or flip-flop, as comfy as they may be in the warmer months, are about the worst thing you can wear during a long day on the water because they have zero support. I typically opt for lightweight running sneakers with good arch support, and believe it or not I truly believe they help me have more gas in the tank by the end of a long day. Now that we’re getting into the cool fall months, you may want something warmer and more substantial on your feet than sneaks. There’s nothing wrong with boots, but don’t just run out and buy a cheap pair of rubber deck boots. Look for brands that are lightweight, have good contoured inserts, and have sufficient arch support. After you buy them, wear them around the house for a day to make sure they’re comfy. Don’t ever let the trial run of any footwear happen during a long day on the water unless you’ve brought shoes you already know are comfy and supportive with you as back ups.


Source : fieldandstream[dot]com
read more →

For Sale: Used Toyota Corolla, Perfect For Muskie Trolling

By Joe Cermele
So they say muskies are the fish of 10,000 casts, right? But if you looked at this guy's odometer, you might be able to figure out if muskies are the fish of 5 miles or 500. All you need to replicate this fishing techique is a really loooong straight road that happens to run next to a really loooong straight canal full of muskies. Oh, and you need a planer board. Have a great weekend.


read more →

HUNT Act: New Bill to Increase Hunting and Fishing Access on Public Lands

By Ben Romans

U.S. Senator Martin Heinrich (D-NM) reintroduced a bill today, that, if signed into law, will allow increased access for hunters and fishermen on federal public lands. The bill directs federal agencies to inventory all public lands larger than 640 acres where hunting and fishing are legal but inaccessible, then work with neighboring landowners to purchase parcels that facilitate access.

Hunt Unrestricted on National Treasures Act (HUNT Act) is Heinrich's second attempt to expand hunting and angling access to public lands by financing adjacent land purchases from willing sellers using a small percentage of monies from the Land and Water Conservation Fund—federal money earmarked for conservation projects across the nation. Heinrich made a similar proposal in 2012 when he was a member of the House of Representatives, but the congressional session ended before legislators voted.

A press release from the Theodore Roosevelt Conservation Partnership says groups like the National Wildlife Federation, Trout Unlimited and the Backcountry Hunters & Anglers applaud the bill.

"The HUNT Act would open millions of acres of landlocked public lands to public access, expanding the opportunity for sportsmen to hunt, fish and otherwise enjoy these uniquely American resources," said Joel Webster, director of the Theodore Roosevelt Conservation Partnership's Center for Western Lands. "Sportsmen need two things to be able to hunt and fish: access and opportunity. We appreciate Senator Heinrich's leadership in introducing this measure and specifically addressing the very real challenge of diminished public access to our publicly owned lands and waters."

It will be several months before Heinrich's HUNT Act moves through committees and is on the Senate floor for debate, and finally, a vote.


Source : fieldandstream[dot]com
read more →

New Mexico Game And Fish Placing Roadblocks This Season

By Ben Romans

On Monday, the New Mexico Department of Game and Fish says is will place roadblocks throughout the during the fall hunting and fishing seasons to collect data and detect wildlife law violations.

A statement released by the department says hunters and anglers should expect conservation officers to check for not only game-law compliance, but adherence to provisions of the Off Highway Motor Vehicle Act and the Aquatic Invasive Species Control Act.

Representatives from the U.S. Forest Service, the Bureau of Land Management, the New Mexico State Police, and various county sheriff's offices will also be on hand to assist conservation officers.


Source : fieldandstream[dot]com
read more →

9-Pound Frog-Eating Largemouth Nearly Induces Heart Attack

By Joe Cermele

I love this video because it perfectly captures something that every fisherman has experienced; the unexpected boat-side eat. As you'll see, the angler is chucking a topwater frog against a bank. Just like most of us would do, he zips it back to the boat after nothing strikes close to shore, and just as he lifts the lure out of the water, WHAM-O! If you've always wondered what it sounds like when a true bucketmouth bass eats on top, turn up your speakers. It also makes you wonder if that bass was sitting close to the boat, or swam fast enough from the bank to actually keep up with the lure and nail it at the last second. 


Source : fieldandstream[dot]com
read more →

Packing to Fish: Five Tips to Make Life Easy

By Kirk Deeter

I get many questions about how best to pack fishing gear for a flight. After thousands of miles and having gear broken and/or lost, I've come up with these five tips.

1) On the question of how to pack rods... Do you carry them on or check them through?  I don't trust being able to carry them on. I've had some flights where I breeze right through, and other nightmares where I had to adjust at the check-in gate. It's so inconsistent, I check rods through now, but only inside tubes, inside my luggage. I've had too many rods broken trying to pack them in sleeves only.

2) Assume TSA is going to go through your stuff. So don't leave items like pliers or fly boxes laying looses. Put them in your vest or pack, or put them in plastic bags, and then pack them.

3) Assume you will be five pounds heavier coming back than when you leave. If you want to avoid excess baggage fees, don't pack your outbound bag right at the 49-pound limit. When your stuff gets wet, it gets heavier. I always pack at 45 pounds or less on my way to go fish.

4) Buy light gear. For the reason I just mentioned, I usually travel with lighter, crushable rain jackets, and sometimes even lighter waders or boots. I'll trade an extra layer of Gore-Tex for a few pounds, unless I am going to a place where I know it will be dumping rain the whole time. There's a big difference with wading boots. Check before you buy. That extra pound or two won't matter as much in the river as it will at the check-in counter.

5) Check your flies, pliers, knives, etc. I could start a small fly shop with all the gizmos I've had confiscated. Don't try to carry on flies. You're asking for extra inspection, and if the hooks are large enough, they will be confiscated.


Source : fieldandstream[dot]com
read more →

How To Catch A Blue Marlin With Your Bare Hands

By Joe Cermele

Upon initial inspection, you might be inclined to think the fish cupped gently in the hands of angler Richard Brackett is a baby sailfish. At least that's what I thought. But it turns out the The Billfish Foundation has confirmed that Brackett's recent "catch" is, in fact, a baby blue marlin. Per the story and illustrations on the organization's website, juvenile marlin start life with no bill, and a "sail" that later develops into a more slender, curved dorsal fin of a mature marlin. What's most interesting about this story to me is that in your lifetime, it's more likely that you'll catch a 1,000-pound blue marlin than hold one this size in the palm of your hand.

Here's the account from Brackett: My boss, Joey Cagle and I decided to run out to swordfish for a couple hours (off of Charleston, SC), so we left about noon and trolled from 200’ straight out to the deep just to see what we came across on the way. We had a pretty good day and ended going 1-2 pm sails and had a couple other bites. Once the sun started to set we set up for a drift. After an hour or so, I saw what we thought to be a juvenile sailfish in the transom lights. Being such a last minute trip, I forgot the dip net so I had to resort to option two. I filled the bucket with water, opened the transom door and scooped him up with my hands and set him in the bucket. I have to say even at this small size they are crazy aggressive. I got him in my hands in the bucket to try and we snapped a quick picture so we could release it as quickly as possible.

Anglers in general, I'd say, don't give too much thought to little versions of big fish and where they live, but you do come across them from time to time. The first pike I ever caught measured about 6 inches and ate a worm under a bobber I was fishing for bluegills. I also hooked into an 8-inch barracuda at the Jersey Shore years ago casting a metal at small bluefish. You ever landed any odd babies?


Source : fieldandstream[dot]com
read more →

Bass Boat Driving Tips: Because You Can't Fish If You're Dead

By Dave Wolak

To kick this off, I'd like everyone to take look at the video below. It is a great example of how a fun outdoor outing can quickly turn into an indoor hospital visit. About the only things the driver of this bass boat did right were wear a life jacket and keep the kill switch connected to himself. Otherwise, he made one of the biggest mistakes possible...jumping a wake at high speed. I thought this video was a sobering jumping off point to talk about proper bass boat handling. Granted, it's not a super "fishy" topic, but you can't catch bass if you're dead.

Bass boats are fast, and bass fishermen like to get to the next spot fast. But you have to know the capabilities of your vessel. Start off slow and only work in the higher ranges of speeds when the conditions are ideal. Over the years, I've met too many bass boaters that know no speeds between full throttle and idle. They pose a danger to themselves, their passengers, and other boaters. Part of being a good driver at high speed is simply knowing when you can open up, and calculating the best route to your next spot. Yes, the shortest distance is a straight line, but not if the water between point A and B is rough. Wind or boat traffic can easily make the shortest route hazardous. So you have to either find a safer, albeit more circuitous route to your spot if you insist on going full-throttle, or you have to learn to limit your speed.

Stay clear of other boats whenever possible, not only because you want to avoid launching boat wakes like the guy in the video, but because you don't know if the people on the other boats are safer drivers or morons, and you don't want to get hurt or damage your boat because of their mistakes. It's just like driving a car cautiously on high-traffic roads.

This may seem minor, but remember to wear adequate eye protection. I always wear sunglasses when driving, but if I'm fishing a tourney where I know I'll be moving fast to cover water, I'll actually wear a snowmobile helmet with sunglasses underneath. The helmet is not protection for possible impact, but to reduce wind resistance as much as possible, because the less wind hitting your face, the better you can see. If you're going to run at 70+mph, you need clear vision in order to react properly.

Finally, wear your kill switch. This is not a preemptive measure because a crash is inevitable. This is for the absolute worst-case scenario. The kill switch does not save your life; driving the boat safely does. 


Source : fieldandstream[dot]com
read more →

Two 5-Pound Bass On One Crankbait

By Joe Cermele

Yeah, so here's a short snippet of something that will likely never happen to you, or in the case of these two fellers, will only happen once in their lives. I'm happy if I catch two 5-pound bass per season. I've caught two bass at once, but never this big. Have a great weekend.


Source : fieldandstream[dot]com
read more →

Behind the Scenes at Orvis: The Raw Graphite Freezer

By Tim Romano

Have you ever seen $50,000 worth of graphite in a freezer?

Me neither. Until two weeks ago, when Kirk and I got a tour of the Orvis Rod factory.

What you're looking at is rolls and rolls of raw sheet graphite, destined for future fly rods.  After asking three different shop employees how much this pile was worth I heard three different answers. I honestly don't know whether this is $20K, $30k, or $100K worth of graphite in a freezer. I think they were being squirlly on purpose about the answer, but my gut tells me that the right one leans toward the higher amount. Regardless, it was impressive to see this much raw graphite, especially considering this was one of two walk-in freezers loaded with the stuff.

Raw graphite must be kept cool, because the resin that holds it together is heat sensitive. Even bringing it into room temperatures causes the resin to activate, making it slightly tacky to the touch. This is how rod blanks are held together at the molecular level.  Of course there's the painting and epoxy, but it's the impregnated resin that does the real work when rolled on a mandrel. Rolling graphite on a mandrel (then throwing it in an oven to bake) is what I'm doing in the image below. When that resin reaches a certain temp it hardens, keeping the graphite hollow and hard and allowing the rest of the rod building process to take place. So, while we'll never know how many future rods were in that freezer or how much that graphite was worth I will tell you you that walking through the Orvis rod factory gave me a much greater appreciation for how fly rods are built and why they can be pretty darn expensive. The steps involved are dozens more than you would ever imagine and the procedures taken to ensure the components are first class and well taken care of were unbelievable to witness first hand.


Source : fieldandstream[dot]com
read more →

Slideshow: High Alpine Wilderness cutthroats

By Tim Romano

Once a year a group of my friends like to get together over beers, look at maps, and plan some masochistic backpacking trip somewhere high in a wilderness area of Colorado. We pick locations based on names, geography, and basically what ''looks" like fun.  Of course fish have to factor in there somehow, but that part is a bit of a gamble as many of these locales are spots that very few people visit. This years trip was two weekends ago and turned out to be epic as usual, but with a bit more rain than we were hoping for.  

Little did we know how much rain we were in for when we returned home to the front range of Colorado after our trip. As I'm sure many of you have seen on the national news my town and many others have been devastated by flooding this past week. Almost everyone I know has been affected in some way.  Many with unimaginable damage to their homes and businesses. My family personally is okay, but it's been a rough go the last 7 days.  While somewhat trivial compared to loss of life and homes I can't help but wonder how my local trout spots west of here fared. Time will tell and trout are hardy creatures, but it's certainly got me worried. Frankly, those wounds are too fresh to cover here and now, but I'll get you all the inside story as it unfolds in the coming days, weeks, and months on what exactly 100 year floods do to small trout creeks and how they recover.

For the time being enjoy the show.


Source : fieldandstream[dot]com
read more →

Vintage Tackle Contest: Spring-Loaded Bait Holder Hook

By Joe Cermele

This week in our vintage tackle contest we've got an oddity that looks kind of like some old-time torture device or wild west dentist's tool. But fear not, it's only a wacky fish hook submitted by Ron Binger. Ron bought it from his neighbor who didn't have any information about it, but Dr. Todd Larson of The Whitefish Press and "Fishing For History" blog had no trouble tracing the backstory of this unique piece.

Dr. Todd says:

"When it comes to fish hooks, it would seem almost every inventive angler felt they could build a better mousetrap, so to speak. Only in this way can we can explain the thousands of patents issued over the years for different styles of fish hooks. You have one of the most ingenious. Patented in 1955 (#2,719,379) by Vincent Fritts of Dover, New Jersey, this interesting hook clamped a minnow or eel using a spring device. My friend Jeff Kieny, author of the book Patented Hooks, Harnesses and Bait Holders, wrote 'This neat gizmo was like a spring loaded garage door…' He also notes that it is a very rare hook. Considering this, I would value this hook at $75-$100 and likely more, if two hook collectors butted heads at an auction. It's a terrific example of American fishing ingenuity."

That's not a bad price for an old piece of metal, Ron! Great find, though as far as fishing is concerned, I'd think that thing would make a live bait look so unnatural, you'd never get a strike. Thanks for sending, and keep an eye on your mailbox, because there's a set of Berkley Aluminum Pliers headed your way.

If you've already sent me photos of your vintage tackle, keep checking every Thursday to see if I chose it for an appraisal by Dr. Todd. If you haven't and want to enter the contest, email photos of your old tackle to fstackle@gmail.com, along with your name, mailing address, and story of how you acquired the gear. If I use it in a Thursday post, you get a pair of Berkley Aluminum Pliers (above) worth $50.


Source : fieldandstream[dot]com
read more →